3.25" Single Groove A Section 4L Sheave with 5/8" (0.625") Keyed Bore - AK32-5/8

3.25" Single Groove A Section 4L Sheave with 5/8" (0.625") Keyed Bore - AK32-5/8Cast Iron 3. 25" Single Groove V Style Section A Belt 4L 5 8" Shaft Pulley Masterdrive single groove 3. 25" pulley for A section 4L belts. This is a high quality cast iron pulley. This pulley is designed to fit a 5 8" keyed shaft and features dual set screws to ensure a completely secure fitting. Most pulleys that are similar to this only have one set screw, making them less reliable in many working conditions. This pulley is designed to be used with

This will work as long as the pressure settings are correct or close enough to adjust the switch to the exact pressure you use

The pilot valve is set for 100-125 PSI from the factory

55" length and standard 3/16" keyway allows easy connection to your existing pulley system without modification

This is a high-quality pulley that measures 10

• Stainless steel case and bezel

• 1/8" Port on the side for Throttle Control

heavy duty Eaton 7

RapidAir Master Compressed Air Piping System

This is a good quality belt that measures 39" outside diameter and is 9/16" wide

Compressed Air Piping Tee #M8011

On the side of this valve there are two ports: one 1/4" Female NPT for a relief valve and a 1/8" Female inverted flare fitting for an unloader line on Ingersoll Rand compressors

(1) 50130  ¼” NPT Brass 45 Degree