4.5" Double Groove A Section 4L Sheave with 5/8" (0.625") H-Style Split Taper Bushing - 2AK46H

4.5" Double Groove A Section 4L Sheave with 5/8" (0.625") H-Style Split Taper Bushing - 2AK46HCast Iron 4. 5" 2 Groove Dual Belt A Section 4L Pulley With 5 8" Sheave Bushing Masterdrive 2 Piece dual groove 4. 5" cast iron pulley sheave with 5 8" H bushing for A section belts. This is a high quality 2 piece pulley that measures 4. 5" outside diameter and is designed to be used with an H style bushing. This 5 8" bushing (Included) inserts into the center of the pulley and slides over the shaft. As you tighten down the bolts on the H bushing it

Front of the block is ported 1/4" Female NPT

you risk damaging or ruining the regulator

• Relief Valve Port: 1/8" Female NPT (measures about 10/32" inside diameter)

Length: 51" outside diameter

25" Dual Groove Belt A Section 4L Pulley w/ 1-1/8" Sheave Bushing

175 PSI Working Pressure

Brand new Prevost ISI061251 1/4" body air coupler

Durkee-Atwood BT-48 Belt

Fluorocarbon O-Ring

This switch comes equipped with an on/off switch and also an unloader valve which can or cannot be used depending on what your compressor calls for

This is installed at the end of your air hose directly before the air tool and provides lubrication for the air tool you are running

Thanks for looking and happy shopping