3/4" Air Tube 100 ft. Roll and Cuting Kit RapidAir MaxLine M6030

3/4" Air Tube 100 ft. Roll and Cuting Kit RapidAir MaxLine M6030(M6030 3 4" Tubing kit made by RAPIDAIR) This listing is for a brand new 3 4" MaxLINE compressed air piping 100ft tubing kit. This is a M6030 kit made by RAPIDAIR. The MaxLINE kit is a great solution for a compressed air piping system in a large garage shop or a commercial application. This kit includes 100ft of MaxLINE 3 4" tubing, tubing cutter, and a tubing chamfer tool. The quality of this aluminum lined tubing is superior. The maxline tubing is

The steel housing has four 3/4"punch out holes for incoming and outgoing wires

This valve comes equipped with a 325 PSI relief valve and a 1/8" female NPT port to install a throttle control valve that is factory set to kick on at 145 PSI and shut off at 175 PSI

• Thermal Protection: Manual Reset Overload

Most 60-80 gallon single stage compressors come with a light duty pressure switch that can burn out the contacts after only a little use

• 1/2" Male flare inlet on the side (also measures approx

Most pulleys that are similar to this only have one set screw making them less reliable in many working conditions

Note: the 3/8" npt female ports measure about 5/8" in diameter

The valve features a 1/2" inverted flare inlet on top (for connection to the main compressor line)

this port comes plugged in case you do not require it in your application

If you currently have a 10 HP air compressor and the contacts on your pressure switch keep burning up

Synthetic Tool Oil

• Size: B96 also known as a 5L990